Automatic Sliding Gate Manufacturers in Chengalpattu

Automatic Sliding Gate Manufacturers in Chennai — Automatic Sliding Gate Manufacturers in Chengalpattu

We are a grand company in Chengalpattu in the field of Automatic Sliding Gate Manufacturers. For any questions contact us.

Automatic Sliding Gate Manufacturers in Chengalpattu

Automatic Sliding Gates Manufacturers in Chengalpattu provide a unique, high-security solution under many circumstances and are quite common in larger commercial & industrial applications, for a variety of reasons as sliding gates can either be single-leaf or twin-leaf and they do not encroach into the driveway or yard area since they slide either side of the opening. Where there are rising driveways, sliding gates are ideal since they do not have to “rise up” the driveway and provided there is sufficient room for one or two leaves to slide in one or either course beyond the opening.

Benefits of Sliding Gates

Sliding Gate Systems are the most secure automatic gate systems around, as due to their operation and positioning, when closed they are almost impossible to open. They are held in apartment by the tracking system, drive motor, and other features of the installation, such that they cannot be wedged sideways except by very unusual and life-threatening force.

Types of Sliding Gate Systems

Sliding Gates would customarily run back and forth on grooved or circular wheels along a level horizontal beam fitted with a channel. The motor will drive the gate back and forth using a rack and pinion mechanism on the gate, powered by a cog at low level on the gate motor.

An alternative method of task is the Stream of light System. Here there is no sunken steel beam the full length of the gate plus itself again. Instead the entire gate is suspended on a relatively short plank system including wheels set in a channel (rather like the wheels of a train carriage

Weight Factor

Unlike swing gates where other factors order how efficiently the gates will operate, a serious factor in sliding gates is the weight of each gate leaf. The entire gate leaf, in this situation is both powered by and resting on the drive unit. Therefore individual automatic sliding gate systems are calibrated in terms of gate weight in relation to motor specification.

Method of Operation

Due to the design and direction of automatic sliding gates the “hydraulic vs. electronically” argument does not enter into the equation. Sliding gates by their very nature cannot be hydraulic in operation. They require to be able to engage or untie when under, at or over recommended thrust levels, in order that the motor does not fail. This operates rather like a clutch in car, which engages to drive and disengages to idle. We also serve in Kanchipuram and Chennai

Size and Rating of Automatic Sliding Gate Motors

Most domestic and light commercial applications can operate on the same motor supporting gate leaf weights of around 300 Kg to 800 Kg. Heavier sliding gate leaves for commercial/industrial applications might require motors which will drive weights in the region 1000 Kg to 2000 Kg. Typically of the above motors would operate from 240V, single-phase AC supply, available in most homes and businesses.

Sliding gate designs can replicate those of swinging gates, giving the illusion of being a pair when closed.

They can be made to the same standard designs and from the same materials as swing gates.